Making Connections for Better Business

Image by ShashiBellamkonda via FlickrBusiness, any business, depends on people and making connections with people is vital to any e-scrap company. I have learned over the years that making these connections is fairly easy and they can pay off in a big way.

For those of us in the e-scrap business it is imperative to make connections with people that make decisions on obsolete and out of date electronics.

Case and point was one of the first clients we ever picked up. We sent out our first round of letters to a few smaller towns south of our location. One of them ended up in the hands of a small computer repair shop owner who happened to also be the IT director for a large automotive factory. The factory had recently upgraded all of their electronics and they needed to get rid of the old.

So we ended up getting the factory, his computer shop and also a computer shop that is owned by a friend of his. All of this with just one letter.

This is just one example of how building relationships can pay off in a big way.

Plastics, Plastics is the Way to Go

Image via WikipediaThere is one thing that many in the e-waste business have to deal with is the plastic. Most of the computers and electronics in the world have some level of plastic on them. It is not all that easy to find a place that will accept the plastics.

When I first started I was using our city's recycling program to deal with the plastics. But it did not take long before the recycling guys decided that they did not want to pick up all that plastic. So I was stuck with finding something else. It was only later that I found out that the recycling guys were nearly fired for refusing to pick up the plastic because it is valuable for recycling.

Anyway it took me three days to find a place that would accept the plastic but I did not deal with them. The main reason is the fact that they were rude. When I call a company I expect to be treated as a customer should be but this was not the case.

About a week later I found a little known company that was less than an hour away from my shop. When I contacted them they were more than happy to help me with just about everything that I needed.

The fact about plastics is that they sell most times for just about the same per pound as standard steel, like the metal that is used in computer towers. The basic plastic that is used is known as ABS but some other kinds are used from time to time.

About the only thing that one must do is ensure that the plastics are separated by grade and type. The company that I am doing business with provides equipment to help with this separation.

What We Do - Wastenot E-Cycling LLC

Image via WikipediaMy name is Craig Weaver and I am the owner and operator of Wastenot E-Cycling LLC.

Our company strives to help the environment by recycling all manner of electronic items from a wide variety of sources. We have helped many companies, non-profit organizations and individuals to reduce their environmental impact by removing all unwanted, non-working and obsolete electronic items from their locations.

Here at Wastenot E-Cycling we have a strict "No Landfill" policy. This means that every items and all parts of those items are recycled, leaving no trash to fill up the waste facility. Recycling actually aids in keeping prices lower as new material is required in smaller quantities when recycled material is present.

Wastenot E-Cycling is a family run company that strives to provide top of the line service to all of our clients. Keeping our clients happy is rule number one at our company.

Our Services

Unlike many other companies in the e-cycling world, Wastenot E-Cycling does NOT charge for electronics recycling. We offer free service to all clients, big or small.

We can schedule a pickup of your electronic items based on the individual needs that you have. For those that produce large quanities with limited space for storage we offer weekly and bi-weekly pickups.
For those that produce smaller quantities we offer monthly and as needed appointements.

Furthermore, our team of dedicated employees will do all the work. We will load all materials ourselves from whatever location is necessary, making it a hands off experience for all of our clients.

Data Destruction and Recycling Certificates

Wastenot E-Cycling provides 100% guaranteed data destruction for computers and storage devices that may have sensitive material stored within. We can provide a certificate of data destruction upon request for any items that have been recycled through our services.

We also provide recycling certificates for those that require them. The removal of assets from companies large and small carries with it certain tax implications and a certificate of recycling is the required documentation for those instances.

Contact Wastenot E-Cycling

Wastenot E-Cycling is here for you no matter what you may need. We have several contact methods that can be used to schedule a pickup or to simply ask some questions about the process.

Email: wastenotllc@gmail.com
Phone: 1-(260)433-1007

Basic E-scrap Prices and Values

Image via Wikipedia

I am going to do something with this article that many people want to charge for. I am going to give a rundown of what the different parts of e-scrap are worth and the prices that you can expect when you are selling them.

It was a tremendous pain in the neck for me when I would start searching the net trying to find the price breakdowns of e-scrap. Every link I would click on would take me to another page that wanted me to pay a monthly fee to see this coveted information. I think it is high time that we just end the secrecy and get on with life.

Alright so let’s get right to it.

E-scrap prices are broken down to the basic parts of most electronics. When scraping electronics it is important to separate everything but they all have different values.

For standard motherboards and slot boards (video cards, sound cards, etc) the standard price is $3.80 per pound. It does not take long to build up a rather hefty sum of cash considering how much one motherboard weighs.

Mid-Grade Boards, such as those that are found in CD/DVD drives, printers and so on sell for around $1.00 per pound. They do have some precious metal on them but it is far less than the motherboard or slot boards.

Low Grade Boards or brown boards (because only one side is green and the other is brown) are the lowest in the circuit board scrap area. They sell for .50 per pound maximum and have very low quantities of precious metals.

Hard drive boards are a bit different. They are referred to as logic boards and they sell for $9.00 per pound or more.

Ram goes even higher in the price range. Ram from older computers does not contain gold but has silver contacts. Refiners buy Ram as mixed memory and the standard price is $13.00 per pound.

Now for the processors or CPUs. The prices vary depending on the processor. Some processors are insanely valuable such as the old 386 and 486 units that will sell for $110.00 per pound. The higher the grade the higher the value.

However, there are the old Pentium II slot processors that are sold for $11.00 per pound as they are more similar to Ram than to processors themselves.

Hard drive platters vary in price depending on how they are sold. They can go as high as $9.00 per pound when sold on eBay but usually they go a bit lower depending on who is bidding.

So, that should give you an idea of the money that can be made through e-scrap. I have seen some forum posts on the internet from people that claim there is no money to be made in e-scrap. Well with the above prices and a little hard work it is easy to see that there is some serious cash to be made.

Stripping a Computer Tower for Precious Metal Refining

Image via Wikipedia

When one decides to start in the exciting and lucrative world of computer and electronics recycling there are bound to be some mistakes. When I first started my company I made plenty of mistakes and they cost me a lot of money. However, after those mistakes I continued to adjust how I handled the materials and it has paid off in a big way.

The first thing that you should do is ensure that you have plenty of room to sort the materials because just about everything in a computer sells separately and to different sources in most cases.

So let’s run down how to strip a computer for maximum value.

Step 1: Gain access to the inside of the computer tower. In my experience each tower is different. Getting inside can be as simple as removing a couple screws and sliding off the panel and can be as complicated finding the locking mechanism and pulling apart the case. There are some great internet sites that show the different methods for opening computers that can be found with a simple Google search.

Step 2: At this point I like to remove the power supply as it will get the wires out of the way. In most cases the power supply is screwed to the outside of the case with either 2 or 4 screws. Once those are removed the supply comes loose. From there simply unplug the various wires from the boards and drives and then set the power supply aside for disassembly.

Step 3: Now I like to remove the ribbon wires. These are the flat wires that connect the motherboard to the various components. These will usually pop right off. I then put them into a box or barrel and save them with other wires that will go into the local scrap metal yard.

Step 4: Now it is time to remove the drives. This can be a little tricky with some towers. Each tower is different as to how the drives are installed. Some can be as easy as compressing a couple of tabs and then sliding the drives out while others have screws that need to be removed. Once the drives are out of the case I set them aside for disassembly later.

Step 5: Removing the slot cards is next. These are usually controllers for devices such as video and sound cards as well as modems. They are attached with a screw at the top and then plugged into the motherboard. After the screw is removed they will pop right out. I then throw them into a box slated for sale to a refiner.

Step 6: Now it is time to remove the motherboard. Again there is no one way that they are attached. However, most of the time they are attached with screws and once they are removed the board will come right out. But, there are also some companies that use tabs that means that the board needs to be slid to one side before removal.

Step 7: With the motherboard out you can remove the ram sticks. These pop out by pushing down the tabs on each end. Once out they should be put into a box and collected for sale to a refiner.

Step 8: The last thing is to remove the heat sink, fan and then the processor. The heat sink and fan are likely held on with a lever that can be easily lifted off. Most heat sinks are aluminum and can be collected and then sold to the local scrap metal yard.

Step 9: Removing the processor is a simple case of pulling up the arm on the side that unlocks the pins and the processor can be pulled out. I toss the processors into yet another box where they are collected for sale to a refiner.

Now on to the other items.

Power Supply Disassembly: The power supply is a fairly simple unit to tear down. There are usually some screws holding the steel case together and once removed the case will come apart. Then there will be some screws holding the circuit board to the lower part of the case. Remove those and then toss the case into a box that will be taken to the scrap metal yard.

On the power supply are many wires that should be cut off. A simple pair of wire cutters can be used to clip off the wires which will then be tossed into the box or barrel where you put the ribbon wire.

The board is what is known as a “low grade brown” circuit board. These are actually pretty low on value and I collect mine and sell them to the local scrap metal yard for about .50 per pound and it adds up fast.

CD/DVD/Floppy Drive Disassembly: Disassembling CD or Floppy drives is fairly simple. Just look for the screws that are holding the cases together and remove them. Once you have access to the inside you need only remove the boards and the cases can be tossed into the scrap steel bin.

The boards from the CD/DVD/Floppy drives are considered mid-grade boards. They have moderate precious metal content. I place them all into the same box and then sell them to my refiner for $1.00 per pound.

Hard Drive Disassembly: Hard drives are a bit more valuable in the grand scheme of things. However, they are also more difficult to disassemble as well. Most hard drives are held together with star screws. On the front cover remove all the screws that you can see. Under the label there is going to be at least one more screw if not two. Once you have the screws out the top will pop off. This is aluminum and should be placed in your aluminum box.

Once you have access to the inside you will see the round, silver discs that hold the information for the hard drive and an arm that is resting on them. You will need to remove the screws around the collar holding the discs down. Then you will remove the brackets holding the arm on. They are held on with screws and two magnets that are made of rare earth materials.

The magnets can be saved in another box and sold online for a decent price. The discs should be collected and sold separately as they have a layer of platinum on them.

Once these items are removed you will need to turn the base over and remove the circuit board. These are known as hard drive logic boards and they are valued at $9.00 per pound and up. They should be saved and then sold to a refiner.

The base is made of cast aluminum and can be tossed into the box with the other materials.

This completes tearing down a computer tower for refining. You have several options for selling materials. eBay is a resource that a lot of e-cyclers like to use for selling their materials but there are other options.

A bit of warning: Never sell to the websites that say that they are buying for gold refining and offering to pay for the shipping with a pre-printed label that they will send to you through email.

I decided to do a small experiment. I collected two boxes of motherboards and listed one on eBay and sent the other to one of those places online. About a week later I had a check from the website for $7.50 for 25 pounds of motherboards and a Paypal payment from a buyer on eBay for $600 for 25 pounds of motherboards.

I found a refiner that operates in Ohio that I send all of my gold bearing material too. They pay some great prices and it makes things a lot easier. It also saves on the eBay and Paypal fees that have become quite high over the years.

The other materials, such as low grade brown boards, wires, aluminum and steel I just transport to the scrap metal yard. Collected over a period of time these items can really add up to some serious cash. For me it makes a great way to keep my gas tank full for picking up more computers from my various clients.